Back seat holder

Rear seat chair

Write a review

Easy to install, just clip it onto the headrest for long drives with your kids.

Easy to put on, just put it in the headrest For long drives with children

It's very simple and you can put your head on the pillow.

It's very easy to put it on, you can put it on your head pillow.

Once you enter, you can put it in the drawer and put it in the drawer.

Purpose

A rear seat holder that can securely hold devices such as smartphones and tablets by simply clamping it to the headrest. The angle can be freely adjusted to portrait or landscape orientation.

Features

Headrest shaft spacing (inner dimensions): Approx. 11cm-14cm Holder compatible device width: Approx. 12cm-19cm Compatible device size: Approx. 4 inches-11 inches (4 inch example: iPhone 5, etc.) (11 inch example: iPad Pro 3rd generation, etc.) Maximum load capacity: Approx. 1kg

how to use

1/ Pass the pole joint part of the arm through the nut and push it into the screw hole of the holder. * Pay attention to the direction of the nut. 2/ Tighten the nut and secure it firmly. * If the fixation is weak, it may cause the holder to fall. 3/ Attach the arm to the shaft of the headrest, then clamp the device you want to use in the holder. * Please make sure the device is firmly fixed.

How to care

Wipe off dirt with a dry cloth. Do not use any liquids that contain volatile organic solvents such as benzine or paint thinner.

Storage Method

Do not leave the product in a car under the hot sun for a long period of time. It may become deformed or discolored. Keep out of reach of children.

Precautions for use

Attach this product to the headrest, then attach the device to be used to the holder. Please check every time you use the product to make sure that the arm is securely attached to the headrest and that the device is securely attached to the holder. Depending on the shape and size of the device you are using, or the thickness of the case you are using, it may not fit the holder size and you may not be able to attach it. Please attach it in a position that does not interfere with the side buttons of the device you are using. If you fix the device you are using to the holder in portrait orientation, it may become unstable depending on its size and weight. Please be careful. Do not apply excessive force or pull it hard. Be careful not to pinch your hands or fingers in the moving parts. Do not use when driving hard or on rough roads. Do not disassemble or modify. If it is deformed or damaged, immediately stop using it. Do not use it for any purpose other than its intended purpose. We take every precaution in production, but in the unlikely event of a defect, we will replace it at the store where you purchased it. We are not responsible for damages that are not based on defects in this product, such as those caused by use other than the intended purpose of this product. Please be aware of this before purchasing. (Japanese only) The design and specifications may be changed without notice for improvement. The company names and product names on the packaging are trademarks or registered trademarks of the respective companies. *Illustrations and images are for illustrative purposes only.

Usefulness

Rear seat holder for thoroughly securing a smartphone or tablet simply by inserting it into the headrest. Adjust the angle vertically or horizontally.

Features

Headrest shaft spacing (inner dimension): 11cm to 14cm (4.33in to 5.51in) Width of device supported by holder: 12cm to 19cm (4.72in to 7.48in) Compatible device size: 4in to 11in (Example of 4in display: iPhone5) (Example of 11in display: iPad Pro 3rd Generation) Maximum supported weight: 1kg (2.20lb)

How to use

1. Pass the arm pole joint through the nut and press into the screw hole on the holder. *Be careful of the direction of the nut. 2. Tighten the nut and make sure it is securely fixed. *If the nut is not securely fastened, the holder may fall. 3. Attach the arm to the headrest shaft and insert the device to use into the holder. *Make sure the device is securely fastened.

How to care

Wipe clean with a dry cloth. Do not use benzene, thinner other volatile organic solvents.

Storage method

Do not leave direct sunlight in a car for extended periods of time. Deformation or discoloration may occur. Keep out of reach of children.

Precautions for use

Attach the product to the headrest, and attach the device to be used to the holder. Make sure that the arm is securely fastened to the headrest and that the device to be used is securely installed to the holder each time you use it. It may be compatible with the holder size or be attachable depending on the shape and size of the device to be used or the installed case thickness. Don't install with the product interfering with the side button of the device to be used. When the device to be used is secured vertically to the holder, it may be unstable depending on the size or weight. Be careful. Don't use excessive force or pull with force. Be careful - don't pinch your hands or fingers in sliding parts. Don't use when driving aggressively or on rough roads. Don't disassemble or modify. Immediately discontinue use if the product becomes deformed or damaged. Don't use this product for purposes other than its intended purposes. *The product may be changed without notice in order to improve its design and specifications. Company names and product names appearing on the package are trademarks or registered trademarks of their respective companies. *Picture is for illustrative purposes only.

Purpose

Rear seat support, just insert the head pillow and your smart phone or tablet computer can be completely fixed. Vertical or horizontal adjustment angle

feature

Headrest wheelbase (inner diameter): 11cm~14cm (4.33"~5.51"); Supported device width: 12cm~19cm (4.72"~7.48"); Compatible device dimensions: 4"~11" (Example 4: iPhone 5) (Example 11: iPad Pro 3rd generation) Maximum support weight: 1kg (2.20").

How to use

1. Insert the arm head into the screw hole and press it into the support. *Please note screw directions. 2. Tighten the screw and ensure the screw is fixed firmly. *If the screw is fixed firmly, the mount may fall off. 3. Connect the hands and arms to the headrest axis, then insert the equipment into the support. * Secure the equipment firmly.

How to protect

Use it to rub the trunk and purify it. No need to use potatoes, dilute soda or other volatile organic solvents.

How to make money

Do not wait in the car for a long time in direct sunlight. May cause shape or color changes. Don't drag your kids near you.

Usage precautions

The product can be connected to the headrest, and the equipment can be connected to the stand for use. Ensure that your hands and arms are firmly fixed on the headrest, and that all equipment used each time you use it is firmly installed on the rack. Based on the shape and size of the equipment to be used or the thickness of the shell to be installed, it can be combined with the support size and size. This product does not require installation of side knobs on the steering equipment. When the equipment to be used is vertically fixed on the support, it may be unstable due to its size or weight. Timid. Do not use excessive force or strain the force. Please note the movement of your hands and fingers. Do not use on rough driving or steep roads. No need to remove or modify. If the product is deformed or damaged, please stop using it immediately. Please do not use this product for non-deposit purposes. *In accordance with the design and specifications of the product, the product cannot be replaced. The company names and product names appearing on the packaging are the trademarks or registered trademarks of the respective companies. *Images are provided for explanation only.

Purpose

Rear seat support, just insert a head pillow and attach a smart phone or flat-screen computer to the bottom. Vertical or horizontal adjustment angle

special expedition

Headrest distance (inner diameter): 11cm~14cm (4.33cm~5.51cm) Support support width: 12cm~19cm (4.72cm~7.48cm) Compatible size: 4cm~11cm (Example 4: iPhone 5) (Example 11: iPad Pro 3rd generation) Maximum support weight: 1kg (2.20kg)

How to use

1. Insert the arm rod head into the screw hole and press it into the support. *Please pay attention to the screw direction. 2. Tighten the screw and ensure the screw is fixed firmly. *If the screw is fixed firmly, the mount may fall off. 3. Connect the hands and arms to the headrest axis and then insert the equipment into the support. *Ensure the equipment is firmly fixed.

How to care

Rub with a dried cloth to clean it. Do not use potatoes, dilute iron, or other potentially toxic organic solvents.

How to save

No need to wait in direct sunlight for a long time in the car. May change shape or color. Don't drag your kids near you.

Precautions for use

Products can be connected to the headrest and equipment can be connected to the rack for use. Ensure that your hands are firmly fixed on the headrest, and all equipment you use is firmly installed on the rack every time you use it. Based on the shape and dimensions of the equipment to be used or the thickness of the outer casing to be installed, it can be installed with the dimensions of the support. This product does not require installation using the side buttons. When the equipment used is vertically fixed on a stand, it may be unstable in size or weight. Timid. Do not overuse or strain the force. Please be careful of slippery hands and fingers. Do not use on rough or dangerous roads. No need to remove or modify. If the product is deformed or damaged, please stop using it immediately. Please do not use this product for non-pre-planning purposes. *In accordance with the design and specifications of high-end products, products cannot be changed. The company names and product names appearing on the packaging are the company's trademarks or registered trademarks. *Images are for explanation only.

Capacity

You can even check the timing of your flight at the airport and get a refund.

homepage

Hd wallpaper size range(my size): 11cm ~ 14cm(4.33in ~ 5.51in) Current size range: 12cm ~ 19cm(4.72in ~ 7.48in) Size range: 4in - 11in(4in desktop model: iPhone5) (11in model: iPad Pro 3) Latest design: 1kg(2.20 packs)

Use limit

1. If you want to know more about my work, please contact me. *Please contact me. 2. I will help you with your work. Yes, it is possible. 3. It is difficult to use because it is difficult to use due to the influence of drugs.

Drinking limit

Please refrain from using the mask, as it may cause further problems.

Viewing

I'm going to put it in the test of time, but I can't do it. I'm going to put it in the test of time.

Use your name

It is recommended to use our products at Hedge Lestrum. It is recommended to use our products at Hedge Lestrum. It is recommended to use the full-sized bottle of Genji to make a selection from the large selection of products available for purchase. I can't believe my eyes, but I can't believe my eyes, because I can't believe my eyes. Please use the promotion code to make sure you understand. I am not responsible for the content of this product. Today is the day. *Product specifications and usage are subject to change without notice. Please enter your company name and product name in the product description field. I'm using it.